CSAN Polisher

Introduction to the machine

The polisher is one of the key tools in the process of polishing and polishing metal surfaces, and one of the most important aspects of analyzing metal samples (using the quantummetric method), especially steel and brass samples, is preparing the surface of the samples. The polisher, manufactured by the Novin Control System Company, has two discs with a diameter of 35 cm, and sandpaper with different roughness numbers can be installed on it based on the customer’s needs. This feature allows the user to use softer and harder sandpapers depending on the type of work and the desired surface. This device has the ability to adjust the rotation speed of the discs. This feature allows the user to choose the appropriate speed for each type of surface and type of sandpaper. The motor speed usually varies between 1500 and 3000 rpm and is selected depending on the user’s needs. All types of sandpaper can be used in this device, and there is no need to glue or use adhesive or special sandpapers. It is also possible to connect a suction (shavings collector) to the device.

Technical specifications Q’Pol-1

• Disc diameter: 35cm
  Motor speed: 1500rpm
  Input power: 380VAC, 50Hz, 3ph
  Power consumption: 2KVA
  Dimensions: 100cm x 56cm x 54cm
  Weight: 81Kg
  Sample holder size: 40,45,50

Benefits  Q’Pol-1

• Low wear
  High durability of the device
  No vibration
  Ability to install sandpaper with different roughness sizes
  Ability to connect to a vacuum cleaner
  Equipped with a timer